Enerpac Specialty Lifting Equipment

Enerpac specializes in high force lifting equipment, our specialty tools & equipment provide lifting solutions for a range of applications. LPC, LB, PR, JHA, JH, LW, SOH-series

LL-Series, Level Lift System

  • The Level Lift System provides a safe, easy solution for level lifting and lowering of uneven loads.
  • Lifts and lowers uneven loads*
  • Robust solution for demanding field use conditions — eliminates the need for electronics or sensors at each lift point
  • Controls up to four lift points
  • Single point of control reduces risk of operator miscommunication
  • Simple, intuitive, easy-to-operate design *Requires cylinders with matching effective areas

PL-Series, P'R-LOCK™ Self-Locking Portable Lift Systems

  • A portable lifting solution that offers continuous load locking technology for heavy lifting applications
  • Provides continuous locking protection during lift, lower and hold functions
  • Patent-pending control technology synchronizes cylinder and lock nut for smooth and efficient lifting and lowering
  • Unique double-acting cylinder offers a low collapsed height to accomodate more lifting applications
  • Simple 2-button pendant allows operation of raise and lower functions from up to 20 feet away
  • All exposed load-bearing steel cylinder components utilize a nitrocarburizing treatment to reduce wear and resist corrosion
  • Ergonomic handle has six positions for comfortable handling and folds when not in use

JH, JHA-Series, Aluminum and Steel Jacks

  • All-directional operation on 7, 15 and 35 ton models (JHA- Series)
  • Internal relief valve to prevent overloading
  • Machined flat front and bottom surfaces permit flush alignment in tight corners
  • All models include pumping handle
  • Chrome plated plungers
  • Automatic by-pass port to prevent over-extension (JH- Series)

FBJ-Series, Industrial Bottle Jacks

  • Lower handle effort reduces operator fatigue
  • Fully serviceable
  • High-strength beam and pump linkage for long life
  • Pumping handle included on all models
  • Safety relief valve to prevent overload
  • Automatic by-pass port to prevent over-extension
  • Wiper seal for extended life

PR-Series, POW'R-RISER Lifting Jack

  • Enerpac Pow'r-Riser lifting jacks are available in 60, 100, 150 and 200-ton capacities with pneumatic or electric pumps for the toughest jobs
  • 4" ground clearance for transport over rail and rough terrain
  • Three position handle provides easy tilt back and transport
  • Complies with ASME/ANSI B30.1:2015 & CE specifications
  • Easy to change external filter minimizes down time
  • Rugged, fully enclosed 24" wide frame with no exposed fittings or hoses
  • SUP-R-STACK™ Extension System allows lifting at all heights without blocking

RC, R, V-Series, Extreme Environment Products

  • Maximum Corrosion Resistance
  • Corrosion resistant, nickel-plated valves and cylinders
  • Stainless steel pump inserts will not corrode
  • Viton® Seals provide heat and chemical resistance
  • Anodized aluminum pump reservoirs and plastic encapsulated pump bodies resist wet environments
  • Two-speed operation reduces pump handle strokes 78% compared to single-speed pumps
  • Pump handles lock for easy carrying

LW-Series, Vertical Lifting Wedge

  • Enerpac vertical lifting wedge requires a .39 inch access gap
  • Lifting force 16 ton at 10,000 psi hydraulic pressure
  • Automatic mechanical retraction (single acting)
  • Securely raises or lowers 16 tons with no slippage
  • Lifting wedge LW-16 includes safety block SB-2
  • Use in tandem to lift 32 tons, or 64 tons
  • .83 inch of vertical lift from each step (maximum lift to 2.72 inches with optional LWB-1 stepped block)

SOH-Series, Hydraulic Machine Lifts

  • For lifting heavy equipment with minimum available access
  • Remote operation of hydraulic pump enhances safety
  • Low-height lifting toe
  • Precision guided to reduce friction and isolate cylinder from side-loads
  • Two extendable support feet provide extra stability
  • Includes RC-Series cylinder with CR-400 coupler

BLS-Series, Double-Acting Climbing Jacks

  • A Simple Solution to Incremental Lifting
  • Climbing Jacks include integral tilt saddles with maximum tilt angles up to 5°
  • Large base with anti-rotation rod for stability and safety
  • Built-in safety valve prevents accidental over-pressurization
  • Baked enamel finish for increased corrosion resistance
  • CR-400 couplers included on all cylinder models